How to Check Car Oil

If you want to enjoy worry-free drives around East Greenwich, then you must regularly schedule service appointments. When you visit our team of service experts, we’ll ensure that your vehicle’s oil level is correct, we’ll check your air filters, and perform other services that your vehicle may need.

However, it’s still important that you check your car’s oil regularly to ensure you don’t run into any issues on your Providence adventures. Not sure how to check car oil? We’ve got you covered. Learn how to check the oil level in your car today with BMW of Warwick!

How to Check the Oil Level in Your Car

Before we go over how to check car oil, it’s important that you reference your owner’s manual. Many newer BMW models don’t have a traditional dipstick for you to check your oil level. Instead, you might find that you can check the oil level in your car through your vehicle’s infotainment system.

Of course, this can vary so we suggest you check your owner’s manual or visit our team of experts for details. If you’ve got an older BMW model or your owner’s manual states that you have an oil dipstick, here’s how to check the oil level in your car:

1. Find level ground and park your vehicle.
2. Ensure your vehicle is off and open your hood.
3. Locate the oil dipstick.
4. Remove the oil dipstick and wipe any oil residue off from the end of it.
5. Put the dipstick back into the tube and pull it back out.
6. Check the oil level and ensure it’s between the “full” and “empty” indicators.
7. If the oil level is correct, you can put the dipstick back and drive your vehicle as normal. If you notice the oil level is incorrect or the oil seems burnt or full of debris, be sure to schedule a service appointment immediately.

Can You Reset the Oil Change Light?

Much like checking the oil level in your vehicle, the exact steps to reset the oil change light can vary depending on your model. The process is typically the same for most vehicles but it’s a good idea to visit our service center near Cranston if you need assistance. With that being said, here are the general steps for resetting your oil change light:

1. With your vehicle running, ensure other accessories are turned off.
2. Locate the odometer reset button.
3. Hold the button until the oil change light starts to flash.
4. Once completed, turn the vehicle off and wait a few seconds.
5. When you turn your vehicle back on, the oil light should be reset.

Get Help With Checking Your Car’s Oil at BMW of Warwick!

As we mentioned, the exact steps for resetting your oil light or checking your oil can vary depending on your vehicle. If you need assistance with checking your car oil or you have other service questions, you can visit us in Warwick or reach out to us online for assistance.